OUR RANGE OF STAINLESS STEEL LONG LENGTHS
The Metal Company stock a wide variety of Long Length Stainless Steel from 1m to 6m lengths in both 304 and 316.
About Stainless Steel Long Lengths
Long lengths come in many shapes and sizes, some of our range includes cylindrical pipes, tubes, angle, square bars, flat bars and more! Stainless Steel Long Lengths are typically used for, however are not limited to: Getting liquid/gas from point A to point B, for structural purposes, and automotive purposes.
About Stainless Steel Long Lengths
Long lengths come in many shapes and sizes, some of our range includes cylindrical pipes, tubes, angle, square bars, flat bars and more! Stainless Steel Long Lengths are typically used for, however are not limited to: Getting liquid/gas from point A to point B, for structural purposes, and automotive purposes.
Videos On Stainless Steel Long Lengths
Watermark vs Standard RapidPress Tube | Technical Tuesday
Watermark Approval is a mandatory certification program for specific plumbing and drainage products to ensure that they are appropriate and authorised for use. Our standard RapidPress press-fit tube is not accompanied by Watermark Approval. Watch Huntley discuss.
Watch Video →How We Send Long Lengths
Watch as Jed discusses how we pick, pack and send your long lengths to you.
Watch Video →What Is Pipe?
Stainless Steel pipe is commonly used to transport fluids and gases. It is produced in different sizes and has many uses such as in wastewater systems, food & beverage facilities, chemical processing, oil and gas processing, and more. Watch Jessie discuss what pipe is and what pipe we stock.
Watch Video →What Are Bars & Profiles?
The Metal Company stocks stainless round bar, flat bar, square bar, angles and channels. These are all named for their shapes. Watch Jessie discuss what bars and profiles are and what we stock here at The Metal Company.
Watch Video →What Is Spiral Weld Tube?
Spiral welded tube is commonly used in industry applications such as HVAC / refrigeration, liquid transfer, waste water, irrigation and pumping. Our spiral welded tube and fittings are measured according to their internal dimensions. This means they are incompatible with standard tube or pipe fittings at the same size. Watch Jed discuss what spiral weld is.
Watch Video →What Is Tube?
Tube is commonly used for a wide range of purposes including food & beverage process lines, structures, machinery, automotive and architecturally. It is cold rolled which means that it has been rolled from a stainless steel coil while cold. This results in a smooth hard finish. Watch Jed as he discusses what tube is and talks about what tube we stock.
Watch Video →What Is The Difference Between OD vs ID Tube? | Technical Tuesday
The Metal Company stock a range of OD (outside diameter) and ID (inside diameter) tube. So what's the difference? Watch Huntley discuss the difference between OD and ID tube and also how to measure it.
Watch Video →What is RHS, SHS and CHS Steel? | Technical Tuesday
In the world of engineering and construction, the acronyms RHS, SHS and CHS are often used. This is most common in the United Kingdom and associated countries, including Australia and New Zealand. Watch Huntley discuss more.
Watch Video →What is Pipe Schedule? | Technical Tuesday
Pipe Schedule is the standard method to define the thickness and pressure rating of pipe. Watch Huntley explain the correlation between schedule number and thickness of pipe and other components to note.
Watch Video →Dairy Tube vs. General Purpose Tube | Technical Tuesday
Both General Purpose and Dairy Tube look the same from the outside so what's the difference? It's all about the internal surface, let Huntley explain
Watch Video →