RapidPress Press-Fit
RapidPress Spigot Bend 90°
RapidPress Spigot Bend 90°
Features
EPDM Seals
Temperature rating: -20°C, 120°C
Maximum operating pressure: 16 Bar (232psi)
Gas Rated and RapidPress Extreme options available
View Dimensions
Related Products
RapidPress Coupler
RapidPress Coupler
Features
EPDM Seals
Temperature rating: -20°C, 120°C
Maximum operating pressure: 16 Bar (232psi)
...
View more features
View Dimensions
RapidPress Startup Kit
RapidPress Startup Kit
Features
Kit inlcudes:
Orbital Tube Cutter, Deburrer, Depth Gauge and our RapidPress Technical Manual.
RapidPress Bend 90°
RapidPress Bend 90°
Features
EPDM Seals
Temperature rating: -20°C, 120°C
Maximum operating pressure: 16 Bar (232psi)
...
View more features
View Dimensions
RapidPress Union
RapidPress Union
Features
EPDM Seals
Temperature rating: -20°C, 120°C
Maximum operating pressure: 16 Bar (232psi)
...
View more features
View Dimensions
RapidPress Equal Tee
RapidPress Equal Tee
Features
EPDM Seals
Temperature rating: -20°C, 120°C
Maximum operating pressure: 16 Bar (232psi)
...
View more features
View Dimensions
RapidPress Flange Table E
RapidPress Flange Table E
Features
RapidPress Coupler - Black EPDM Seal
Flange Manufactured to AS2129 Table E Standard (*)
(*) Please note that sizes 22.0x20NB to 42.0x40NB do not meet AS2129 thickness. The thickness has been increased to avoid unacceptable warpage that can occur at standard thickness, as recommended in the standard. These flanges will be denoted as "NON STANDARD".
...
View more features
View Dimensions
RapidPress O-Ring EPDM Seal
RapidPress O-Ring EPDM Seal
Features
EPDM O-Ring - Black
Typically used with Potable Water, Heating, Cooling/Refridgeration, Treated Water, Desalinated Water, Rainwater, Compressed Air
Certificates/Approvals: KTW, W 270, DVGW W 534
...
View more features
View Dimensions
RapidPress End Cap
RapidPress End Cap
Features
EPDM Seal
Temperature rating: -20°C, 120°C
Maximum operating pressure: 16 Bar (232psi)
...
View more features
View Dimensions
RapidPress Bend 45°
RapidPress Bend 45°
Features
EPDM Seals
Temperature rating: -20°C, 120°C
Maximum operating pressure: 16 Bar (232psi)
...
View more features
View Dimensions
RapidPress Union EPDM Flat Washer
RapidPress Union EPDM Flat Washer
Features
EPDM Union Flat Washer - Black
For use with RapidPress Unions
For Unions *with* Male BSP or Female BSP ends, please see our RapidPress EPDM M/F Union Flat Washer
View Dimensions
RapidPress Deburrer Tool
RapidPress Deburrer Tool
Features
Suitable for deburring both pipe/tube internals and externals
Can be used with Stainless Steel, Copper, Brass, Aluminium, Plastic and more
View Dimensions
RapidPress M/F Union EPDM Flat Washer
RapidPress M/F Union EPDM Flat Washer
Features
EPDM Flat Washer - Black
For use with RapidPress Male BSP Unions and Female BSP Unions
For standard RapidPress Union Gaskets *without BSP ends* please see our RapidPress EPDM Union Flat Washer
View Dimensions
RapidPress Depth Gauge
RapidPress Depth Gauge
Features
Depth Gauge for sizes 15mm to 168.3mm
To ensure a correctly inserted joint, the tube must be witness marked with a fine-point/felt-tip pen where it meets the fitting using the depth gauge so that full insertion can be verified
View Dimensions
RapidPress Flange PN10-40
RapidPress Flange PN10-40
Features
RapidPress Coupler - Black EPDM Seal
Flange Manufactured to EN1092-1 Type 01/A PN10/16/40 Standard (*)
(*) To determine the flange spec, please refer to the end of the code as shown in between stars (RPF28*PN10-40*). Please note, stars are for visual purposes of this example only.
...
View more features
View Dimensions
RapidPress Union with Tri Clover
RapidPress Union with Tri Clover
Features
EPDM Seals
Complete Set including: RapidPress Tri Clover Adapter (x2), Tri Clover Clamp (304) and Tri Clover Seal
Temperature rating: -20°C, 120°C
...
View more features
View Dimensions
RapidPress Pressing Heads & Adapters 76.1-108
RapidPress Pressing Heads & Adapters 76.1-108
Features
M-Profile
Adapter Jaw (AJ76108) required for use of the 76.1mm & 88.9mm Pressing Head. Also for the initial press for 108.0mm Pressing Head
Adapter Jaw (AJ108) required for the secondary press for the 108.0mm Pressing Head
View Dimensions
RapidPress Rotary Tube Cutter Blade
RapidPress Rotary Tube Cutter Blade
Features
Replacement wheel blade to suit the RapidPress Rotary Tube Cutter
Suitable for Stainless Steel, Copper and Aluminium tubing
Suitable for sizes from 15mm to 76.2
View Dimensions
RapidPress to Male BSP Union with Tri Clover
RapidPress to Male BSP Union with Tri Clover
Features
EPDM Seals
Complete Set including: RapidPress Tri Clover Adapter, BSP Nipple to Tri Clover Adapter, Tri Clover Clamp (304) and Tri Clover Seal
Temperature rating: -20°C, 120°C
...
View more features
View Dimensions
RapidPress Union with RJT
RapidPress Union with RJT
Features
EPDM Seals
Complete Set including: RapidPress to RJT Male Adapter, RapidPress to RJT Female Adapter, RJT Hex Nut (304) and RJT Stepped Seal (NBR)
Temperature rating: -20°C, 100°C
...
View more features
View Dimensions
RapidPress Flange ANSI150
RapidPress Flange ANSI150
Features
RapidPress Coupler - Black EPDM Seal
Flange Manufactured to ASME B16.5 ANSI150 Standard (*)
(*) Please note that these flanges are Non Hubbed and Flat Faced. These flanges will be denoted as "NON STANDARD".
...
View more features
View Dimensions
RapidPress to Male BSP Union with RJT
RapidPress to Male BSP Union with RJT
Features
EPDM Seals
Complete Set including: RapidPress to RJT Female Adapter, BSP Nipple to RJT Male Adapter, RJT Hex Nut (304) and RJT Stepped Seal (NBR)
Temperature rating: -20°C, 100°C
...
View more features
View Dimensions
