Unions
BSP Nipple to Tri Clover Adapter
BSP Nipple to Tri Clover Adapter
Features
- BSP Threaded End - BSP Male
- Working Pressure: 150lbs (psi) / 10bar
- Working Temperature: 250°C at 10bar
- Flat Spot For Ease Of Tightening
- BSP thread conforms with ISO 7-1/ISO 228-1
- Male Threads are Tapered (BSPT)
View Dimensions
Related Products
-
-
-
-
-
Tri Clover Union with Short Ferrule
Tri Clover Union with Short Ferrule
Features
- Complete Set including Clamp, 2x Ferrules, and Seal (EPDM)
- Clamp is Grade 304
- Other material grade Seals available as separate parts
...
View Dimensions
-
RJT Union with Hex Nut
RJT Union with Hex Nut
Features
- Complete Set including Hex Nut, Male Part, Weld Liner and Stepped Seal (NBR)
- Hex Nut is Grade 304
- Other material grade Seals available as separate parts
View Dimensions
-
-
Swivel Joint
Swivel Joint
Features
- EPDM and PTFE Seals
- Food Grade Lubricant Grease
- Additional sizes available upon request
View Dimensions
-
DIN Male Part
DIN Male Part
Features
- Butt welds to Diameter Nominal (DN) tube sizes
- Product Conforms to Hygienic Standard DIN11851
View Dimensions
-
-
-
-
RJT Union with Slotted Nut
RJT Union with Slotted Nut
Features
- Complete Set including Slotted Nut, Male Part, Weld Liner and Stepped Seal (NBR)
- Slotted Nut is Grade 304
- Other material Seals available as separate parts
View Dimensions
-
-
-
-
-
DIN Weld Liner
DIN Weld Liner
Features
- Butt welds to Diameter Nominal (DN) tube sizes
- Product Conforms to Hygienic Standard DIN11851
View Dimensions
-
-
-
-
DIN Slotted Nut
DIN Slotted Nut
Features
- Can be used for DIN and DIN Inch unions
- RJT C Spanners can be used for DIN Slotted Nuts
- Product Conforms to Hygienic Standard DIN11851
View Dimensions
-
-
-
-
-
-
-
SMS EPDM Seal
SMS EPDM Seal
Features
- EPDM temperature rating 120°C
- EPDM is suitable for hot water, steam, alcohols, coolants, acids and bases
View Dimensions
-
-
-
DIN Dust Cap
DIN Dust Cap
Features
- Not to be used for liquids as does not seat against seal in Male Part
- Use for empty lines only
- Can be used for DIN and DIN Inch unions
...
View Dimensions
-
-
-
-
-
DIN NBR Seal
DIN NBR Seal
Features
- Nitrile (NBR) seal temperature rating 120°C
- Nitrile is suitable for oils, hydrocarbon fuels, hydraulic fluids, fats, and flame retardant liquids
- Product Conforms to Hygienic Standard DIN11851
View Dimensions
-
-
-
-
-
-
-
-
-
BSP Socket to RJT Male Adapter
BSP Socket to RJT Male Adapter
Features
- No Need For Welding! Save Time And Effort With One-Piece Adapters
- BSP Threaded Socket
- Working Pressure: 150lbs (psi) / 10bar
...
View Dimensions
-
-
-
-
-
Tri Clover EPDM Seal
Tri Clover EPDM Seal
Features
- EPDM seal temperature rating 120 °C
- EPDM is suitable for general insulation of hot water, steam, alcohols, coolants, acids and bases
- FDA Approved
View Dimensions
-
-
-
Tri Clover FKM Seal
Tri Clover FKM Seal
Features
- FKM Seal Temperature Rating 230°C
- FKM Is Suitable For Higher Temperatures And Restricting Permeation Of Chemicals
- FDA Approved
View Dimensions
-
-
Tri Clover PTFE Seal
Tri Clover PTFE Seal
Features
- PTFE temperature rating 180 C - 250 C
- PTFE is suitable for hot water, steam, alcohols, coolants, acids and bases
View Dimensions
-
-
-
RJT Stepped NBR Seal
RJT Stepped NBR Seal
Features
- NBR temperature rating 100°C
- NBR is suitable for oils, hydrocarbon fuels, hydraulic fluids, fats, foods, water, glycol and flame retardant liquids
- 1/2" and 3/4" seals are flat section gaskets (RJTSS12 & RJTSS20)
...
View Dimensions
-
-
-
RJT Stepped EPDM Seal
RJT Stepped EPDM Seal
Features
- EPDM temperature rating 120°C
- EPDM is suitable for hot water, steam, alcohols, coolants, acids and bases
- FDA Approved
View Dimensions
-
-
RJT Stepped FKM Seal
RJT Stepped FKM Seal
Features
- FKM Seal Temperature Rating: 230°C
- FKM Is Suitable For Higher Temperatures And Restricting Permeation Of Chemicals
- FDA Approved
View Dimensions
-
-
RJT Stepped PTFE Seal
RJT Stepped PTFE Seal
Features
- PTFE temperature rating 180 C - 250 C
- PTFE is suitable for hot water, steam, alcohols, coolants, acids and bases
- FDA Approved
View Dimensions
-
-
-
RJT O-Ring EPDM Seal
RJT O-Ring EPDM Seal
Features
- EPDM seal maximum temperature rating 120 °C
- EPDM is suitable for general insulation of hot water, steam, alcohols, coolants, acids and bases
- FDA Approved
View Dimensions
-
-
-
RJT Equal Tee
RJT Equal Tee
Features
- 320 Grit Finish
- Pre-Welded with RJT Connections
- Male Part / Male Part / Weld Liner & Hex Nut Orientation
View Dimensions
-
-
-
-
-
-
-
