RapidPress Press-Fit
RapidPress Red Ball Valve Handle Sleeve
RapidPress Red Ball Valve Handle Sleeve
Features
- Red handle sleeve available for hot water indication (Sleeve only, handle not included)
- Fits our RapidPress 3pc Ball Valve Handles
Related Products
-
RapidPress Coupler
RapidPress Coupler
Features
- EPDM Seals
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Bend 90°
RapidPress Bend 90°
Features
- EPDM Seals
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
FlexiFlow Hose with RapidPress Couplers
FlexiFlow Hose with RapidPress Couplers
Features
- ***Fabrication Required. Please get in touch with us for leadtime. This product is non-returnable***
- FlexiFlow Stainless Steel Convoluted Braided Hose with RapidPress Couplers (-20°C to +120°C)
- Hose Test Standard: ISO 10380-2012, Hose Designation: Type 1-10 ...
- Click 'View Dimensions' for the following information: 'D' = Static/Flexing Minimum Bend Radius (mm), 'G' Working/Test Pressure (bar)
- Please note: Working/Test Pressure (bar) applies to the Flexible Hose only, end connections are excluded from these ratings
View Dimensions
-
RapidPress Union
RapidPress Union
Features
- EPDM Seals & Gasket
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress Plain Clamp
RapidPress Plain Clamp
Features
- To suit RapidPress tube
- Includes Stainless Steel Metric Fasteners
View Dimensions
-
RapidPress Equal Tee
RapidPress Equal Tee
Features
- EPDM Seals
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Pressing Tool Case
RapidPress Pressing Tool Case
Features
- RapidPress Pressing Tool Case for ACO203 & ACO203XL Pressing Tools
View Dimensions
-
RapidPress Flange Table E
RapidPress Flange Table E
Features
- RapidPress Coupler - Black EPDM Seal
- Flange Manufactured to AS2129 Table E Standard (*)
- (*) Please note that sizes 22.0x20NB to 42.0x40NB do not meet AS2129 thickness. The thickness has been increased to avoid unacceptable warpage that can occur at standard thickness, as recommended in the standard. These flanges will be denoted as "NON STANDARD". ...
- Flange Forged to ASTM A182 (F316L)
- Temperature Rating: -20°C, 120°C
- Maximum Operating Pressure: 16 Bar (232 psi)
View Dimensions
-
RapidPress O-Ring EPDM Seal
RapidPress O-Ring EPDM Seal
Features
- EPDM O-Ring - Black
- Typically used with Potable Water, Heating, Cooling/Refridgeration, Treated Water, Desalinated Water, Rainwater, Compressed Air
- Certificates/Approvals: KTW, W 270, DVGW W 534 ...
- Patented seal ring with lenticular profile which fits the press crimp groove which provides a 20% enlargement of the sealing surface
- Fit makes the pipes insertion easier
View Dimensions
-
RapidPress Startup Kit
RapidPress Startup Kit
Features
- Kit includes: Orbital Tube Cutter, Deburrer, Depth Gauge and our RapidPress Technical Manual.
-
RapidPress ACO203 Complete Set 15-54
RapidPress ACO203 Complete Set 15-54
Features
- Tool comes with full set of compatible pressing heads
- Press sizes from 15.0mm to 54.0mm
- Work light for safe working ...
- Analysis of tool performance via NovoCheck app
- Data transfer via Bluetooth®
- Brushless Motor Technology
- Runs Milwaukee® M18™ Battery
View Dimensions
-
RapidPress ACO203XL Complete Set 15-108
RapidPress ACO203XL Complete Set 15-108
Features
- Tool comes with full set of compatible Pressing Heads (excludes 88.9mm Pressing Head)
- Press sizes from 15.0mm to 108.0mm
- Rotatable head ...
- Analysis of tool performance via NovoCheck app
- Data transfer via Bluetooth®
- Brushless Motor Technology
- Runs Milwaukee® M18™ Battery
View Dimensions
-
RapidPress End Cap
RapidPress End Cap
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Slip Coupler
RapidPress Slip Coupler
Features
- EPDM Seals
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress ACO203XL 15-108 Tool
RapidPress ACO203XL 15-108 Tool
Features
- *Tool, Battery, Charger and Case only*
- Press sizes from 15.0mm to 108.0mm
- Rotatable head ...
- Analysis of tool performance via NovoCheck app
- Data transfer via Bluetooth®
- Brushless Motor Technology
- Runs Milwaukee® M18™ Battery
- Ask us about our ex hire tools available for purchase!
View Dimensions
-
RapidPress Male BSP Union
RapidPress Male BSP Union
Features
- EPDM Seals & Gasket
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme & RapidPress Gas ranges (RapidPress Gas Male BSP Union supplied with Brass BSP Nipple)
View Dimensions
-
RapidPress Bend 45°
RapidPress Bend 45°
Features
- EPDM Seals
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Union EPDM Flat Washer
RapidPress Union EPDM Flat Washer
Features
- EPDM Union Flat Washer - Black
- For use with RapidPress Unions
- For Unions *with* Male BSP or Female BSP ends, please see our RapidPress EPDM M/F Union Flat Washer
View Dimensions
-
RapidPress Pressing Head Case 76.1-108
RapidPress Pressing Head Case 76.1-108
Features
- For RapidPress Pressing Heads & Adapters from 76.1 to 108.0
View Dimensions
-
RapidPress Clip Head & 'T' Bracket
RapidPress Clip Head & 'T' Bracket
Features
- To suit RapidPress Press-Fit Tube
- Fasteners included
- Additional sizes available on request
View Dimensions
-
RapidPress Reducing Tee
RapidPress Reducing Tee
Features
- EPDM Seals
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Bossed Clamp
RapidPress Bossed Clamp
Features
- M10 Boss (17mm long)
- Clamp to suit RapidPress Tube
- Includes Stainless Steel Metric Fasteners ...
- Smaller sizes are available as Saddles
View Dimensions
-
RapidPress Male BSP Coupler
RapidPress Male BSP Coupler
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress ACO203 15-54 Tool
RapidPress ACO203 15-54 Tool
Features
- *Tool, Battery, Charger and Case only*
- Press sizes from 15.0mm to 54.0mm
- Work light for safe working ...
- Analysis of tool performance via NovoCheck app
- Data transfer via Bluetooth®
- Brushless Motor Technology
- Runs Milwaukee® M18™ Battery
- Ask us about our ex hire tools available for purchase!
View Dimensions
-
RapidPress Pressing Head Set 76.1-108
RapidPress Pressing Head Set 76.1-108
Features
- Full set of Pressing Heads and Adapters from 76.1-108.0 (excludes 88.9mm Pressing Head)
- Comes with it's own carrying case
- M-Profile
View Dimensions
-
RapidPress Deburrer Tool
RapidPress Deburrer Tool
Features
- Suitable for deburring both pipe/tube internals and externals
- Can be used with Stainless Steel, Copper, Brass, Aluminium, Plastic and more
View Dimensions
-
RapidPress Female BSP Union
RapidPress Female BSP Union
Features
- EPDM Seals & Gasket
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress Female BSP Coupler
RapidPress Female BSP Coupler
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
- Leak before press up to 54mm
View Dimensions
-
RapidPress Spigot Bend 90°
RapidPress Spigot Bend 90°
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Female BSP Tee
RapidPress Female BSP Tee
Features
- EPDM Seals
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Pressing Tool Case Handle
RapidPress Pressing Tool Case Handle
Features
- Replacement Handle for RapidPress Pressing Tool Case (ACO203/ACO203XL)
View Dimensions
-
RapidPress M/F Union EPDM Flat Washer
RapidPress M/F Union EPDM Flat Washer
Features
- EPDM Flat Washer - Black
- For use with RapidPress Male BSP Unions and Female BSP Unions
- For standard RapidPress Union Gaskets *without BSP ends* please see our RapidPress EPDM Union Flat Washer
View Dimensions
-
RapidPress Bossed Saddle
RapidPress Bossed Saddle
Features
- M10 Boss (17mm long)
- Saddle to suit RapidPress Tube
- Includes Stainless Steel Metric Fasteners ...
- Larger sizes are available as Clamps
View Dimensions
-
RapidPress Reducing Coupler
RapidPress Reducing Coupler
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Depth Gauge
RapidPress Depth Gauge
Features
- Depth Gauge for sizes 15mm to 168.3mm
- To ensure a correctly inserted joint, the tube must be witness marked with a fine-point/felt-tip pen where it meets the fitting using the depth gauge so that full insertion can be verified
View Dimensions
-
RapidPress Rubber Lined Bossed Saddle
RapidPress Rubber Lined Bossed Saddle
Features
- EPDM Liner
- M10 Boss
- To suit RapidPress Tube
View Dimensions
-
RapidPress Spigot Bend 45°
RapidPress Spigot Bend 45°
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Inox Press-Fit Tube
EN 10312/EN 10217-7
RapidPress Inox Press-Fit Tube
EN 10312/EN 10217-7
Features
- Manufactured to EN 10312/EN 10217-7 Standards
- 180 Grit Finish
- 6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
View Dimensions
-
RapidPress Pressing Jaws Handle
RapidPress Pressing Jaws Handle
Features
- Replacement Handle for RapidPress Pressing Jaws (76.1-108.0)
View Dimensions
-
RapidPress Clip Head & Hanging Bracket
RapidPress Clip Head & Hanging Bracket
Features
- To suit RapidPress Press-Fit Tube
- Fasteners included
- Hanging Bracket suits M10 ...
- Additional sizes available on request
View Dimensions
-
RapidPress Flange PN10-40
RapidPress Flange PN10-40
Features
- RapidPress Coupler - Black EPDM Seal
- Flange Manufactured to EN1092-1 Type 01/A PN10/16/40 Standard (*)
- (*) To determine the flange spec, please refer to the end of the code as shown in between stars (RPF28*PN10-40*). Please note, stars are for visual purposes of this example only. ...
- Flange Forged to EN10222-5 (1.4404 (F316L))
- Temperature Rating: -20°C, 120°C
- Maximum Operating Pressure: 16 Bar (232 psi)
View Dimensions
-
RapidPress Pressing Heads & Adapters 15-54
RapidPress Pressing Heads & Adapters 15-54
Features
- M-Profile
- Adapter Jaw (AJ4254) required for use of the 42.0mm & 54.0mm Pressing Heads
View Dimensions
-
RapidPress Stubbed Clamp
RapidPress Stubbed Clamp
Features
- 16mm Stub (47mm long, 50mm from tube)
- Clamp to suit RapidPress Tube
- Includes Stainless Steel Metric Fasteners
View Dimensions
-
RapidPress Rotary Tube Cutter
RapidPress Rotary Tube Cutter
Features
- Suitable for Stainless Steel, Copper and Aluminium tubing
- Built-in deburrer
View Dimensions
-
RapidPress Male BSP Bend 90°
RapidPress Male BSP Bend 90°
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Pressing Tool Case Latching Clips
RapidPress Pressing Tool Case Latching Clips
Features
- Latching Clip to suit RapidPress Pressing Tool Cases (ACO203/ACO203XL) & RapidPress Pressing Jaws Case (76.1-108.0)
View Dimensions
-
RapidPress Pressing Heads & Adapters 76.1-108
RapidPress Pressing Heads & Adapters 76.1-108
Features
- M-Profile
- Adapter Jaw (AJ76108) required for use of the 76.1mm & 88.9mm Pressing Head. Also for the initial press for 108.0mm Pressing Head
- Adapter Jaw (AJ108) required for the secondary press for the 108.0mm Pressing Head
View Dimensions
-
RapidPress 3pc Ball Valve
RapidPress 3pc Ball Valve
Features
- EPDM Seals
- RapidPress Coupler Connections
- Full Port ...
- Lockable latch handle
- Temperature Rating: -20°C, 120°C
- Red handle sleeves available for purchase
- RapidPress Extreme options available
- **Please note: 76.1x65NB has been fabricated from a standard 65NB BSP Ball Valve and two 76.1 RapidPress Weld Couplers**
View Dimensions
-
RapidPress Inox Press-Fit Tube (WM)
EN 10312/EN 10217-7
RapidPress Inox Press-Fit Tube (WM)
EN 10312/EN 10217-7
Features
- Manufactured to EN 10312/EN 10217-7 Standards. WaterMark Approved for use with potable water
- 180 Grit Finish, Annealed
- 6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
View Dimensions
-
RapidPress Union with Tri Clover
RapidPress Union with Tri Clover
Features
- Complete set including: RapidPress Tri Clover Adapter x2 (EPDM Seal), Tri Clover Clamp (SS 304) & Tri Clover Seal (EPDM)
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress Male BSP Elbow 90°
RapidPress Male BSP Elbow 90°
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Rotary Tube Cutter Blade
RapidPress Rotary Tube Cutter Blade
Features
- Replacement wheel blade to suit the RapidPress Rotary Tube Cutter
- Suitable for Stainless Steel, Copper and Aluminium tubing
View Dimensions
-
RapidPress Clip Head
RapidPress Clip Head
Features
- To suit RapidPress Press-Fit Tube
- Fasteners included
- Additional sizes available on request
View Dimensions
-
Milwaukee M18 Battery
Milwaukee M18 Battery
Features
- 2.0Ah & 5.0Ah batteries for use with our RapidPress Pressing Tools
- (Charger not included)
View Dimensions
-
RapidPress Ball Valve Handle Extension
RapidPress Ball Valve Handle Extension
Features
- 70mm Handle Extension
- Extend your RapidPress Valve Handle above insulation or hard to reach places
View Dimensions
-
RapidPress to Male BSP Union with Tri Clover
RapidPress to Male BSP Union with Tri Clover
Features
- Complete set including: RapidPress Tri Clover Adapter (EPDM Seal), BSP Nipple to Tri Clover Adapter, Tri Clover Clamp (SS 304) & Tri Clover Seal (EPDM)
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress Female BSP Elbow 90°
RapidPress Female BSP Elbow 90°
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
Clip Head 'T' Bracket
Clip Head 'T' Bracket
Features
- For use with our Tube Clip Heads and RapidPress Clip Heads
View Dimensions
-
RapidPress Flange ANSI150
RapidPress Flange ANSI150
Features
- RapidPress Coupler - Black EPDM Seal
- Flange Manufactured to ASME B16.5 ANSI150 Standard (*)
- (*) Please note that these flanges are Non Hubbed and Flat Faced. These flanges will be denoted as "NON STANDARD". ...
- Flange Forged to ASTM A182 (F316L)
- Temperature Rating: -20°C, 120°C
- Maximum Operating Pressure: 16 Bar (232 psi)
View Dimensions
-
RapidPress Union with RJT
RapidPress Union with RJT
Features
- Complete set including: RapidPress to RJT Male Adapter (EPDM Seal), RapidPress to RJT Female Adapter (SS 304 Hex Nut, EPDM Seal), RJT Stepped Seal (NBR)
- Temperature rating: -20°C to +100°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress Female BSP Wing Back
RapidPress Female BSP Wing Back
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
Clip Head Hanging Bracket
Clip Head Hanging Bracket
Features
- For use with our Tube Clip Heads and RapidPress Clip Heads
View Dimensions
-
RapidPress to Male BSP Union with RJT
RapidPress to Male BSP Union with RJT
Features
- Complete set including: RapidPress to RJT Female Adapter (SS 304 Hex Nut, EPDM Seal), BSP Nipple to RJT Male Adapter, RJT Stepped Seal (NBR)
- Temperature rating: -20°C to +100°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress Female BSP Extended Wing Back
RapidPress Female BSP Extended Wing Back
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- BSP Thread: ISO 7-1, EN 10226-1
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
-
RapidPress Weld Coupler
RapidPress Weld Coupler
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress Expansion Flange
RapidPress Expansion Flange
Features
- EPDM Seal
- To suit RapidPress Tube sizes
- Fastener hole size: 4mm ...
- Temperature rating: -20°C, 120°C
- A purpose designed seal, used when process piping penetrates a wall, floor or ceiling in Food & Beverage Plants or any application where a waterproof hygenic seal is required.
View Dimensions
-
RapidPress to RJT Male Adapter
RapidPress to RJT Male Adapter
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress to RJT Female Adapter
RapidPress to RJT Female Adapter
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress to Tri Clover Adapter
RapidPress to Tri Clover Adapter
Features
- EPDM Seal
- Temperature rating: -20°C to +120°C
- Also available in our RapidPress Extreme range
View Dimensions
-
RapidPress Expansion Compensator
RapidPress Expansion Compensator
Features
- EPDM Seals
- Temperature rating: -20°C to +120°C
- Maximum operating pressure: 16 Bar (232 psi) ...
- Refer to page 35 in our RapidPress Technical Guide for our Expansion Compensation Table
- Measurement 'D' = Maximum amount of expansion length
- Also available in our RapidPress Extreme, RapidPress Gas & RapidPress Steam ranges
View Dimensions
